A = Platform Width
B = Platform Depth
C = Hoistway Width
D = Hoistway Depth
E = Clear Door Width
F = Clear Door Height

O = Overhead
P = Pit Depth
R = Door Clearance
R = 5″ for Regular Type Doors
R = 6 3/4” for Pass Type Doors

Download Available Information

Contact an Elevator Package Representative to place an order

Application Summary

This design utilizes two hydraulic jacks and provides maximum structural stability. The telescope jacks are located on each side of the car.

Advantages

  • No jack hole s required. This eliminates the cost of drilling and the risk of oil contamination.
  • Accommodates front and rear openings in any configuration.
  • Available for both low and high capacity cars.
  • Less overhead required than 2 stage holeless.

ENGINEERED TO ORDER – Contact MEI For Sizes or Capacities Outside Listed Ranges

Specifications

Freight Elevators – Standard Specifications
Capacity (lbs)
Platform
A x B
Hoistway With Power Regular Doors
C x D
Hoistway With Power Pass Doors
C x D
Pit Depth
P
Front/Rear
Clear Inside With Single Section Gate WxD
Clear Inside With Two Section Gate WxD
Door Width & Height
E x F
Elevation & Plan View Drawings
4000 Lbs
7′ -0″ x 8′ -0″
8′ -11″ x 8′ -8″
8′ -11″ x
8′ -9 3/4“
4′ -6″
F
6′ -8″ x 7′ -7″
6′ -8″ x 7′ -4 1/2“
6′ -8″ x 8′ -0″
DWG File PDF File
4000 Lbs
7′ -0″ x 8′ -0″
8′ -11″ x 8′ -10″
8′ -11″ x
9′ -1 1/2“
4′ -6″
F/R
6′ -8″ x 7′ -6″
6′ -8″ x 7′ -1“
6′ -8″ x 8′ -0″
DWG File PDF File
5000 Lbs
8′ -0″ x 9′ -0″
9′ -11″ x 9′ -8″
9′ -11″ x
9′ -9 3/4“
4′ -6″
F
7′ -8″ x 8′ -7″
7′ -8″ x 8′ -4 1/2“
7′ -8″ x 8′ -0″
DWG File PDF File
5000 Lbs
8′ -0″ x 9′ -0″
9′ -11″ x 9′ -10″
9′ -11″ x
10′ -1 1/2“
4′ -6″
F/R
7′ -8″ x 8′ -6″
7′ -8″ x 8′ -1″
7′ -8″ x 8′ -0″
DWG File PDF File
6000 Lbs
10′ -4″ x 10′ -0″
12′ -6″ x 10′ -8″
12′ -6″ x
10′ -9 3/4“
4′ -6″
F
10′ -0″ x 9′ -7″
10′ -0″ x
9′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File
6000 Lbs
10′ -4″ x 10′ -0″
12′ -6″ x 10′ -10″
12′ -6″ x
11′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 9′ -6″
10′ -0″ x 9′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File
8000 Lbs
10′ -4″ x 12′ -0″
12′ -6″ x 12′ -8″
12′ -6″ x
12′ -9 3/4“
4′ -6″
F
10′ -0″ x 11′ -7″
10′ -0″ x
11′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File
8000 Lbs
10′ -4″ x 12′ -0″
12′ -6″ x 12′ -10″
12′ -6″ x
13′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 11′ -6″
10′ -0″ x 11′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File
10000 Lbs
10′ -4″ x 14′ -0″
12′ -6″ x 14′ -8″
12′ -6″ x
14′ -9 3/4“
4′ -6″
F
10′ -0″ x 13′ -7″
10′ -0″ x
13′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File
10000 Lbs
10′ -4″ x 14′ -0″
12′ -6″ x 14′ -10″
12′ -6″ x
15′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 13′ -6″
10′ -0″ x 13′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File
Automobile Lifts
Capacity (lbs)
Platform
A x B
Hoistway With Power Regular Doors
C x D
Hoistway With Power Pass Doors
C x D
Pit Depth
P
Front/Rear
Clear Inside With Single Section Gate
WxD
Clear Inside With Two Section Gate
WxD
Door Width & Height
E x F
Min. Overhead With One Section Gate
Max. Speed FPM
8000 Lbs
9′ -4″ x 21′ -8″
11′-10″ x 22′-4″
11′-10″ x 22′-6″
4′ -6″
F
9′-0″ x 21′-3″
9′-0″ x 21′-0 1⁄2“
9’ x 9’
15’-1”
150
8000 Lbs
9′ -4″ x 21′ -8″
11′-10″ x 22′-6″
11′-10″ x 22′-10″
4′ -6″
F/R
9′-0″ x 21′-2″
9′ -0″ x 20′ -9″
9’ x 9’
15’-1”
150
10000 Lbs
10′-4″ x 23′-0″
12’-10” x 23’-8”
12’-10” x 23’-10”
4′ -6″
F
10′-0″ x 22′-7″
10′-0″ x 22′-4 1⁄2″
10’ x 9’
15’-1”
150
10000 Lbs
10′-4″ x 23′-0″
12′-10″ x 23′-10″
12′-10″ x 24’-2”
4′ -6″
F/R
10′-0″ x 22′-6″
10′-0″ x 22′-1″
10’ x 9’
15’-1”
150
Freight Elevators – Standard Specifications

4000 Lbs

7′ -0″ x 8′ -0″
8′ -11″ x x 8′ -8″
8′ -11″ x x 8′ -9 3/4“
4′ -6″
F
6′ -8″ x 7′ -7″
6′ -8″ x 7′ -4 1/2“
6′ -8″ x 8′ -0″
DWG File PDF File

4000 Lbs

7′ -0″ x 8′ -0″
8′ -11″ x x 8′ -10″
8′ -11″ x x 9′ -1 1/2“
4′ -6″
F/R
6′ -8″ x 7′ -6″
6′ -8″ x 7′ -1“
6′ -8″ x 8′ -0″
DWG File PDF File

5000 Lbs

8′ -0″ x 9′ -0″
9′ -11″ x 9′ -8″
9′ -11″ x 9′ -9 3/4“
4′ -6″
F
7′ -8″ x 8′ -7″
7′ -8″ x 8′ -4 1/2“
7′ -8″ x x 8′ -0″
DWG File PDF File

5000 Lbs

8′ -0″ x 9′ -0″
9′ -11″ x 9′ -10″
9′ -11″ x 10′ -1 1/2“
4′ -6″
F/R
7′ -8″ x 8′ -6″
7′ -8″ x 8′ -1″
7′ -8″ x x 8′ -0″
DWG File PDF File

6000 Lbs

10′ -4″ x 10′ -0″
12′ -6″ x 10′ -8″
12′ -6″ x 10′ -9 3/4“
4′ -6″
F
10′ -0″ x 9′ -7″
10′ -0″ x 9′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File

6000 Lbs

10′ -4″ x 10′ -0″
12′ -6″ x 10′ -10″
12′ -6″ x 11′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 9′ -6″
10′ -0″ x 9′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File

8000 Lbs

10′ -4″ x 12′ -0″
12′ -6″ x 12′ -8″
12′ -6″ x 12′ -9 3/4“
4′ -6″
F
10′ -0″ x 11′ -7″
10′ -0″ x 11′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File

8000 Lbs

10′ -4″ x 12′ -0″
12′ -6″ x 12′ -10″
12′ -6″ x 13′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 11′ -6″
10′ -0″ x 11′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File

10000 Lbs

10′ -4″ x 14′ -0″
12′ -6″ x 14′ -8″
12′ -6″ x 14′ -9 3/4“
4′ -6″
F
10′ -0″ x 13′ -7″
10′ -0″ x 13′ -4 1/2“
10′ -0″ x 8′ -0″
DWG File PDF File

10000 Lbs

10′ -4″ x 14′ -0″
12′ -6″ x 14′ -10″
12′ -6″ x 15′ -1 1/2“
4′ -6″
F/R
10′ -0″ x 13′ -6″
10′ -0″ x 13′ -1“
10′ -0″ x 8′ -0″
DWG File PDF File
Automobile Lifts
8000 Lbs
9′ -4″ x 21′ -8″
11′-10″ x 22′-4″
11′-10″ x 22′-6″
4′ -6″
F
9′-0″ x 21′-3″
9′-0″ x 21′-0 1⁄2“
9’ x 9’
15’-1”
150
8000 Lbs
9′ -4″ x 21′ -8″
11′-10″ x 22′-6″
11′-10″ x 22′-10″
4′ -6″
F/R
9′-0″ x 21′-2″
9′ -0″ x 20′ -9″
9’ x 9’
15’-1”
150
10000 Lbs
10′-4″ x 23′-0″
12’-10” x 23’-8”
12’-10” x 23’-10”
4′ -6″
F
10′-0″ x 22′-7″
10′-0″ x 22′-4 1⁄2″
10’ x 9’
15’-1”
150
10000 Lbs
10′-4″ x 23′-0″
12′-10″ x 23′-10″
12′-10″ x 24’-2”
4′ -6″
F/R
10′-0″ x 22′-6″
10′-0″ x 22′-1″
10’ x 9’
15’-1”
150

Notes:

  • Overhead dimensions are based on 6 foot high car gates.
  • Two section car gates are not recommended for high usage installations or wide openings.
  • For extra high door opening requirements, or special conditions, consult your representative.

Standard Cab Height H = 8′ -0″

Guidelines for determining overhead required:For 3 Stage Jack

  1. Car Speed = Up to 150 FPM
  2. Top Overtravel = 12″
  3. Bottom Overtravel = 8″
  4. Pit Depth = 4′ -6″
  5. Cab Height = 8′ -0″

Overhead Requirements:

3 Stage Jack with Single Section Gate:
Minimum of 15′ -1″ overhead required for 38′ -9″ of travel and under. Add 11/32” for every additional 1″ of travel over 38′ -8″.

3 Stage Jack with two Section Gate: 
Minimum of 13′ -0″ overhead required for 32′ -0″ of travel and under. Add 11/32” to 13′ -0″ for every additional 1″ of travel over
32′ -9″.