A = Platform Width
B = Platform Depth
C = Hoistway Width
D = Hoistway Depth

E = Clear Door Opening
F = Clear Door Opening
O = Overhead
P = Pit Depth
S = Platform to Wall

Download Available Information

Contact an Elevator Package Representative to place an order

Application Summary

This application is used when a side opening is required in addition to a front opening. The rails and brackets are located on one wall of the hoistway. Please note that the dimensions shown are only examples of applications possible. Please call MEI for job-specific dimensions..

Advantages

  • No jack hole is required.
  • Accommodates front and side openings.

ENGINEERED TO ORDER – Contact MEI For Sizes or Capacities Outside Listed Ranges

Specifications

Passenger Elevators – Standard Specifications (Low Capacity)
Capacity (lbs)
Platform
A x B
Hoistway
C x D
Laminate Clear Inside W x D
Platform to Wall S
Door Type
Door Width E
Side Door Type
Side Door Width F
Elevation & Plan View Drawings
2100 Lbs
6’-0” x 5’-1”
7’-4” x 6’-11 1⁄4”
5’-9” x 4’-3 1⁄2”
16″
1-SP
3′ -0″
2100 Lbs
6’-5 1⁄2” x 5’-1 1⁄4”
7’-8” x 6’-11 1⁄2”
5’-9” x 4’-3 1⁄2”
16″
1-SP
3′ -0″
2-SP
3′ -0″
DWG FilePDF File
2500 Lbs
7’-0” x 5’-1”
8’-4” x 6’-11 1⁄4”
6’-9” x 4’-3 1⁄2”
16″
1-SP
3′ -6″
2500 Lbs
7’-5 1⁄2” x 5’-1 1⁄4”
8’-8” x 6’-11 1⁄2”
6’-9” x 4’-3 1⁄2”
16″
1-SP
3′ -6″
2-SP
3′ -0″
DWG FilePDF File
3000 Lbs
7’-0” x 5’-6”
8’-4” x 7’-4 1⁄4”
6’-9” x 4’-8 1⁄2”
16″
1-SP
3′ -6″
3000 Lbs
7’-5 1⁄2” x 5’-6 1⁄4”
8’-8” x 7’-4 1⁄2”
6’-9” x 4’-8 1⁄2”
16″
1-SP
3′ -6″
2-SP
3′ -6″
DWG FilePDF File
3500 Lbs
7’-0” x 6’-2”
8’-4” x 8’-0 1⁄4”
6’-9” x 5’-4 1⁄2”
16″
1-SP
3′ -6″
3500 Lbs
7’-5 1⁄2” x 6’-2 1⁄4”
8’-8” x 8’-0 1⁄2”
6’-9” x 5’-4 1⁄2”
16″
1-SP
3′ -6″
2-SP
3′ -6″
DWG FilePDF File
4000 Lbs
8’-0” x 6’-2”
9’-4” x 8’-3 3/4”
7’-9” x 5’-3”
18″
2-SP
4′ -0″
4000 Lbs
8’-5 1⁄2” x 6’-0 3⁄4”
9’-8” x 8’-11”
7’-9” x 5’-3”
18″
1-SP
4′ -0″
2-SP
4′ -0″
DWG FilePDF File
P Pit Depth = 4′ -0″ • O Minimum Overhead (See Below) • Cab Height = 8′ -0″ • S Platform To Wall, Jack Side Platform to Wall = 20″

Guidelines for determining overhead required:

For 1 Stage Jack

  1. Car Speed = Up to 150 FPM
  2. Top Overtravel = 5″
  3. Bottom Overtravel = 12″
  4. Pit Depth = 4′ -0″
  5. Cab Height = 8′ -0″

One Stage Jack Overhead Requirement:
Minimum of 12′ -5″ overhead required for 11′ -0″ of travel and under. If over 11′ -0″ travel, overhead must be 18″ greater than total travel.

For 2 Stage Jack

  1. Car Speed = Up to 150 FPM
  2. Top Overtravel = 12″
  3. Bottom Overtravel = 10″
  4. Pit Depth = 4′ -0′
  5. Cab Height = 8′ -0″

Two Stage Jack Overhead Requirement:
Minimum of 13′ -3″ overhead required for 20′ of travel and under. Add 1/2” to 13′ -3″ for every additional 1″ of travel over 20′ -0″.