Submersible Power Unit Motor Hoist
MEI’s Pully Bully will make changing a submersible pump or motor a snap! The Pully Bully is a safe, economical method that will save you time and frustration on your next service call.
- Lifting Capacity: 500 lbs.
- Complies with ASME B30.17 – 1998
- Weight: 185 lbs.
- Instructions Included
- Safe Operation
- Reduce Labor Hours
- Light Weight
- Quick & Easy Setup
- Easy Clean Up
- Portable Cart
How it Works
Roll the Pully Bully into the machine room. Detach the hoisting frame from the cart (the cart/drip pan will later serve as a workbench that collects the excess oil). Set up the hoisting frame (see photos below). Use the chain hoist to rig and pull the pump/motor combination out of the power unit. Set the pump/motor combination on the cart/drip pan, and make the necessary repairs.
Easy Clean Up
The excess oil funnels into a removable container located under the drip pan. Simply remove the container and pour the excess oil back into the tank.
|17936||Submersible Pully Bully|
|21973||Submersible Pully Bully Oil Collection Kit|
|21974||Submersible Pully Bully Tank Frame Attachment Kit|
|21975||Submersible Pully Bully Main Frame Kit|